Moscow
+7 495 66-141-99
+7 495 506-01-12
info@kitprom.com
Nizhny Novgorod
+7 831 272-06-66
Novosibirsk
+7 383 269-45-87
The quality which has been checked up by time!
 

Epoxy glass laminate sheet with foil

Catalogue <<< LAMINATE SHEET, RODS <<< Epoxy glass laminate <<< Epoxy glass laminate sheet with foil
Order
Amount

 Epoxy glass laminate sheet with foil GOST 10316-78. It is applied in instrument making, a radio engineering, electronics to manufacturing printed-circuit-boards. Supposes machining. Thickness of 0,5-3,0 mm. Time of stability to influence of the fused solder at t 260ºС not less than 20 сек. (1 class). Durability on peeling in an initial condition (for width of a strip of 3 mm) not less 4,5Н (1 class).

 Epoxy glass laminate sheet with foil  heat-resistant       (ТУ16-503.161-83). It is applied in a radio engineering, instrument making, electronics to manufacturing usual and multilayered printed-circuit-boards. Maximum permissible temperature from-60ºС up to +105ºС. Nominal thickness of 0,5 mm. A tangent of a corner of dielectric losses at frequency of 1 MHz after air-conditioning in conditions of 96 hours (40ºС) 93 % for thickness from 0,8 up to 3,0 mm no more than 0,030. Dielectric permeability at frequency of 1 MHz after air-conditioning in conditions of 96 hours (40ºС) 93 % no more than 5,5. Water absorption for thickness of 3,0 mm no more than 25 mg. Specific volumetric electric resistance after air-conditioning in conditions: 96 hours (40ºС) 93 % not less 1,0*1010 Оhm*m; 1 hour (125ºС) less than 20 % not less than 1,0*109 Оhm*m. Durability on  separation a contact platform not less than 60 N.The time of stability to influence of the fused solder at t 260ºС, not less 30s.

Epoxy glass laminate sheet with foil, CHARACTERISTICS:

 

The name of a parameter

 

-

Dielectric permeability at frequency of 1 MHz after air-conditioning in conditions of 96 hours (40оС) 93 %

 

No more than 5,5..

 

Tangent of a corner of dielectric losses at frequency of 1 MHz after air-conditioning in conditions of 96 hours (40оС) 93 % for thickness from 0,8 up to 3,0 mm.

No more than 0,030

Water absorption for thickness of 3,0 mm

No more than 25 mg

 Specific volumetric electric resistance after air-conditioning in conditions: 96 hours (40оС) 93 % not less 1,0*1010 Оhm*m; 1 hour (125оС) less than 20 %

Not less than 1,0*109 Оhm*m.

Durability on отрыв a contact platform not less than 60 N. Time of stability to influence of the fused solder at t 260оС,

Not less than 30 seconds

 

Stability to boiling in water, h

1,5

 

Superficial electric resistance the Ohm not less

 

After air-conditioning in conditions:

 

-

a) 96 hours (40оС) 93 %

 

b) 1 hour (125оС) less than 20 %

1,0*1010Оhm*m;

1,0*109 Оhm*m

 


Warning: Unknown: open(/tmp/sess_f7adc2d3e03459ea68ab1e10d4f165aa, O_RDWR) failed: Disk quota exceeded (122) in Unknown on line 0

Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/tmp) in Unknown on line 0